Welcome to the house of H. P.
 
 
Home >> Products >> H.P. Jointing Sheets
H.P. Jointing Sheets
--------------------------------------------------------------------------------------------------------------------------------------
H.P. Jointing 2000 H.P. Jointing 2100 H.P. Jointing 2200
H.P. Jointing 2300 H.P. Jointing 2400 H.P. Jointing 2500
H.P. Jointing 2600 H.P. Jointing 3000 H.P. Jointing 4000
H.P. Jointing 1000
 
H.P. Jointing 2000
Material Description
This compressed fiber jointing sheet is a consistently uniform pliable & resilient product. A price worthy quality of dependable performance, adoptability to many sealing requirements make this steam jointing. It is recommended to seal off steam, water, air & various alkaline chemicals.
Colour Identity
Red or Black Colour
Recommended Maximum Temperature
380° C.
Recommended Maximum Pressure
35Kg/Sq.Cm.
Specification Compliance
I.S.I. : 2712 - 1979
Thickness Available
0.25 MM To 6.0 MM. Wire reinforced material
Also Available in Thickness
0.60 MM To 6.0 MM.
top
 
H.P. Jointing 2100
Material Description
This compressed asbestos fiber jointing sheet is used in internal Combustion Engines, Compressors, Pipe Systems, Apparatus, Containers, Light Weight Components etc. This material is especially suitable for applications where a drop in sealing load is experienced & also for joints with low sealing surfaces such as valve covers, oil pans etc. Other properties include high dimensional stability, impermeability to several gases & controlled swelling in oils.
Colour Identity
Yellow
Recommended Maximum Temperature
500° C
Recommended Maximum Internal Pressure
100 BAR
Specification Compliance
A.S.T.M. -F -104F112950M7
Thickness Available
0.25 MM & Above.
top
 
H.P. Jointing 2200
Material Description
This Material is used to seal off most transmission & Hydraulic Fluids. Refrigerating oils, Motor Oils, Carburettor---Fuel, Mixtures, Steam Water/Anti Freeze & Water/Anti Corrosion mixtures, alkalies & solvents. Suitable for use in internal combustion engines, compressors, chemical plants etc. This grade also provides effective sealing against hot oils, chlorinated & aromatic hydrocarbons.
Colour Identity
Green
Recommended Maximum Temperature
500° C
Recommended Maximum Internal Pressure
140 BAR
Specification Compliance
I.S.T - 2712 - 1979 
A.S.T.M. - F104F112330M7.
D.S. - 2815 - 1973
B.S. - 1832 - 1972
J.I.S. - R3453(1985) Type 1.
Thickness Available
0.25 MM & Above
top
 
H.P. Jointing 2300
Material Description
This material is used to seal off motor oil, carburettor mixtures, most transmission & hydraulic fluids, refrigerating oils, fuels, steam, water/ anti freeze & water/ anti corrosion mixtures & alkalies. This grade offers high oil & fuel resistance.
Colour Identity
Dark Grey
Recommended Maximum Temperature
450° C
Recommended Maximum Internal Pressure
50 BAR
Specification Compliance
D.I.N.-37545IT-'O'
A.S.T.M. - F104F112121
J.I.S.-R 3453(1985) Type 3
Thickness Available
0.25 MM & Above
top
 
H.P. Jointing 2400
Material Description
This material is used to seal off aggressive organic & inorganic acids, Alkalis, Alcohols, Esters & Ketones.
Colour Identity
Blue
Recommended Maximum Temperature
150° C
Recommended Maximum Pressure
20 BAR
Specification Compliance
D.I.N. - 3754 ITS.
Thickness Available
0.25 MM & Above
top
 
H.P. Jointing 2500
Material Description
This material is a specialized asbestos fiber jointing sheet which is intimately bonded with acid resisting compound, to with stand the corrosive action of acids & chemicals. Recommended for use against hot concentrated organic, inorganic & mineral acids including hydrochloric, sulphuric (oleum) & nitric acids, under service conditions of temperature & pressure commonly encountered in chemical industries.
Colour Identity
Cream / Light Gray
Recommended Maximum Temperature
210° C
Recommended Maximum Pressure
150 Kg / Sq.Cm
Specification Compliance
 Indian ISI - 2712 - 1979
Thickness Available
0.4 MM & Above
top
 
H.P. Jointing 2600
Material Description
This material is used to seal off motor oil, carburettor mixtures, most transmission & hydraulic fluids, low temperature oil, steam, alkalies & water / antifreeze & water / anti corrosion mixtures. Highly suitable for internal combustion engines, compressors, pipe etc.
Colour Identity
One side graphited one side green
Recommended Maximum Temperature
450° C
Recommended Maximum Internal Pressure
70 BAR
Specification Compliance
 I.S.I. - 2712 - 1979.
A.S.T.M. - F-104F112340M6.
J.I.S. - R3453 (1985) Type1.
Thickness Available
0.25 MM & Above
top
 
H.P. Jointing 3000
Material Description
This material is used to seal off water, steam, air & various alkaline chemicals.
Colour Identity
Red / Graphited
Recommended Maximum Temperature
380° C
Recommended Maximum Internal Pressure
55 BAR
Specification Compliance
Wire Reinforced
Thickness Available
0.6 MM & Above
top
 
H.P. Jointing 4000
Material Description
This material is used to seal off alcohols, Water, Air, Oils, Fuels etc. This Grade is especially suitable for internal combustion engines, compressors, Pipelines & several other industrial applications.
Colour Identity
Graphited
Recommended Maximum Temperature
600° C
Recommended Maximum Internal Pressure
200 BAR
Specification Compliance
Wire Reinforced
Thickness Available
0.6 MM & Above
top
 
H.P. Jointing 1000
Material Description
Over a period of time the brand name 3D has been recognized as one of India's largest selling gasket jointing sheets. Now to meet the requirement of International market, now 3D introduces their non asbestos gasket material, with their nam range of material which are made from heat resistance & highly elastic synthetic fibres, mineral fibres & synthetic elastomers, which are processed under elevated pressure & temperature.

3D Gasket jointing sheets are manufactured on the latest machines developed with the aid of research, applied science, specialized technical knowledge & innovative skills of technocrats having experiences of a life time in the same line.

3D Non asbestos jointing sheets are produced to international specification ( A.S.T.M., D.I.N.., J.I.S., etc) & fulfill the exacting service requirements in engineering, automobile, chemical, petrochemical, petroleum, refrigeration, power generation, paper, sugar, & other industries.

Colour Identity
Green, Red, Yellow, Blue, Grey.
Recommended Maximum Temperature
400° C
Recommended Maximum Internal Pressure
90 BAR
Thickness Available
0.25 MM to 3.00 (MM (for non metallic range)
0.60 MM to 3.0 MM (for metallic range)
top